# The Name of the Title Is Hope

> [!NOTE]
> **Overleaf Project:** [git.overleaf.com/6ae05e2e72446c974da5a114](https://git.overleaf.com/6ae05e2e72446c974da5a114)  
> **Last Synced:** 2026-11-03 08:01:50 (via PA Git Sync)  
> **Source File:** `sigconf-authordraft.tex`

# The Name of the Title Is Hope

**Authors:** Ben Trovato, G.K.M. Tobin, Lars Th{\o, Valerie B\'eranger, Aparna Patel, Huifen Chan, Charles Palmer, John Smith, Julius P. Kumquat, Brooke Aster, David Mehldau

> [!ABSTRACT]
> A clear and well-documented \LaTeX\ document is presented as an
  article formatted for publication by ACM in a conference proceedings
  or journal publication. Based on the ``acmart'' document class, this
  article presents and explains many of the common variations, as well
  as many of the formatting elements an author may use in the
  preparation of the documentation of their work.

---

\authornote{Both authors contributed equally to this research.}

\orcid{1234-5678-9012}

\correspondingauthor
\authornotemark[1]

  \city{Dublin}
  \state{Ohio}
  \country{USA}
}

rv{\"a}ld}
rv{\"a}ld Group}
  \city{Hekla}
  \country{Iceland}}

  \city{Rocquencourt}
  \country{France}
}

 \city{Doimukh}
 \state{Arunachal Pradesh}
 \country{India}}

  \city{Haidian Qu}
  \state{Beijing Shi}
  \country{China}}

  \city{San Antonio}
  \state{Texas}
  \country{USA}}

rv{\"a}ld Group}
  \city{Hekla}
  \country{Iceland}}

\correspondingauthor

  \city{New York}
  \country{USA}}

\renewcommand{\shortauthors}{Trovato et al.}

\begin{CCSXML}
<ccs2012>
 <concept>
  <concept_id>00000000.0000000.0000000</concept_id>
  <concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
  <concept_significance>500</concept_significance>
 </concept>
 <concept>
  <concept_id>00000000.00000000.00000000</concept_id>
  <concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
  <concept_significance>300</concept_significance>
 </concept>
 <concept>
  <concept_id>00000000.00000000.00000000</concept_id>
  <concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
  <concept_significance>100</concept_significance>
 </concept>
 <concept>
  <concept_id>00000000.00000000.00000000</concept_id>
  <concept_desc>Do Not Use This Code, Generate the Correct Terms for Your Paper</concept_desc>
  <concept_significance>100</concept_significance>
 </concept>
</ccs2012>
\end{CCSXML}

\ccsdesc[500]{Do Not Use This Code~Generate the Correct Terms for Your Paper}
\ccsdesc[300]{Do Not Use This Code~Generate the Correct Terms for Your Paper}
\ccsdesc{Do Not Use This Code~Generate the Correct Terms for Your Paper}
\ccsdesc[100]{Do Not Use This Code~Generate the Correct Terms for Your Paper}

\keywords{Do, Not, Use, This, Code, Put, the, Correct, Terms, for,
  Your, Paper}

\begin{teaserfigure}
 \includegraphics[width=\textwidth]{sampleteaser}
  \caption{Seattle Mariners at Spring Training, 2010.}
  \Description{Enjoying the baseball game from the third-base
  seats. Ichiro Suzuki preparing to bat.}
  \label{fig:teaser}
\end{teaserfigure}

\received{20 February 2007}
\received[revised]{12 March 2009}
\received[accepted]{5 June 2009}

## Introduction

ACM's consolidated article template, introduced in 2017, provides a
consistent \LaTeX\ style for use across ACM publications, and
incorporates accessibility and metadata-extraction functionality
necessary for future Digital Library endeavors. Numerous ACM and
SIG-specific \LaTeX\ templates have been examined, and their unique
features incorporated into this single new template.

If you are new to publishing with ACM, this document is a valuable
guide to the process of preparing your work for publication. If you
have published with ACM before, this document provides insight and
instruction into more recent changes to the article template.

The ``\verb|acmart|'' document class can be used to prepare articles
for any ACM publication --- conference or journal, and for any stage
of publication, from review to final ``camera-ready'' copy, to the
author's own version, with {\itshape very} few changes to the source.

## Template Overview

As noted in the introduction, the ``\verb|acmart|'' document class can
be used to prepare many different kinds of documentation --- a
double-anonymous initial submission of a full-length technical paper, a
two-page SIGGRAPH Emerging Technologies abstract, a ``camera-ready''
journal article, a SIGCHI Extended Abstract, and more --- all by
selecting the appropriate {\itshape template style} and {\itshape
  template parameters}.

This document will explain the major features of the document
class. For further information, the {\itshape \LaTeX\ User's Guide} is
available from
<https://www.acm.org/publications/proceedings-template>.

### Template Styles

The primary parameter given to the ``\verb|acmart|'' document class is
the {\itshape template style} which corresponds to the kind of publication
or SIG publishing the work. This parameter is enclosed in square
brackets and is a part of the {\verb|documentclass|} command:
\begin{verbatim}
  \documentclass[STYLE]{acmart}
\end{verbatim}

Journals use one of three template styles. All but three ACM journals
use the {\verb|acmsmall|} template style:

* {`acmsmall`}: The default journal template style.
* {`acmlarge`}: Used by JOCCH and TAP.
* {`acmtog`}: Used by TOG.

The majority of conference proceedings documentation will use the {\verb|acmconf|} template style.

* {`sigconf`}: The default proceedings template style.
* {`sigchi`}: Used for SIGCHI conference articles.
* {`sigplan`}: Used for SIGPLAN conference articles.

### Template Parameters

In addition to specifying the {\itshape template style} to be used in
formatting your work, there are a number of {\itshape template parameters}
which modify some part of the applied template style. A complete list
of these parameters can be found in the {\itshape \LaTeX\ User's Guide.}

Frequently-used parameters, or combinations of parameters, include:

* {`anonymous,review`}: Suitable for a ``double-anonymous''
  conference submission. Anonymizes the work and includes line
  numbers. Use with the `\string\acmSubmissionID` command to print the
  submission's unique ID on each page of the work.
* {`authorversion`}: Produces a version of the work suitable
  for posting by the author.
* {`screen`}: Produces colored hyperlinks.

This document uses the following string as the first command in the
source file:
\begin{verbatim}
\documentclass[sigconf,authordraft]{acmart}
\end{verbatim}

## Modifications

Modifying the template --- including but not limited to: adjusting
margins, typeface sizes, line spacing, paragraph and list definitions,
and the use of the \verb|\vspace| command to manually adjust the
vertical spacing between elements of your work --- is not allowed.

{\bfseries Your document will be returned to you for revision if
  modifications are discovered.}

## Typefaces

The ``\verb|acmart|'' document class requires the use of the
``Libertine'' typeface family. Your \TeX\ installation should include
this set of packages. Please do not substitute other typefaces. The
``\verb|lmodern|'' and ``\verb|ltimes|'' packages should not be used,
as they will override the built-in typeface families.

## Title Information

The title of your work should use capital letters appropriately -
<https://capitalizemytitle.com/> has useful rules for
capitalization. Use the {\verb|title|} command to define the title of
your work. If your work has a subtitle, define it with the
{\verb|subtitle|} command.  Do not insert line breaks in your title.

If your title is lengthy, you must define a short version to be used
in the page headers, to prevent overlapping text. The \verb|title|
command has a ``short title'' parameter:
\begin{verbatim}
  
\end{verbatim}

## Authors and Affiliations

Each author must be defined separately for accurate metadata
identification.  As an exception, multiple authors may share one
affiliation. Authors' names should not be abbreviated; use full first
names wherever possible. Include authors' e-mail addresses whenever
possible.

Grouping authors' names or e-mail addresses, or providing an ``e-mail
alias,'' as shown below, is not acceptable:
\begin{verbatim}
  
  
  
\end{verbatim}

The \verb|authornote| and \verb|authornotemark| commands allow a note
to apply to multiple authors --- for example, if the first two authors
of an article contributed equally to the work.

If your author list is lengthy, you must define a shortened version of
the list of authors to be used in the page headers, to prevent
overlapping text. The following command should be placed just after
the last \verb|\author{}| definition:
\begin{verbatim}
  \renewcommand{\shortauthors}{McCartney, et al.}
\end{verbatim}
Omitting this command will force the use of a concatenated list of all
of the authors' names, which may result in overlapping text in the
page headers.

The article template's documentation, available at
<https://www.acm.org/publications/proceedings-template>, has a
complete explanation of these commands and tips for their effective
use.

Note that authors' addresses are mandatory for journal articles.

## Rights Information

Authors of any work published by ACM will need to complete a rights
form. Depending on the kind of work, and the rights management choice
made by the author, this may be copyright transfer, permission,
license, or an OA (open access) agreement.

Regardless of the rights management choice, the author will receive a
copy of the completed rights form once it has been submitted. This
form contains \LaTeX\ commands that must be copied into the source
document. When the document source is compiled, these commands and
their parameters add formatted text to several areas of the final
document:

* the ``ACM Reference Format'' text on the first page.
* the ``rights management'' text on the first page.
* the conference information in the page header(s).

Rights information is unique to the work; if you are preparing several
works for an event, make sure to use the correct set of commands with
each of the works.

The ACM Reference Format text is required for all articles over one
page in length, and is optional for one-page articles (abstracts).

## CCS Concepts and User-Defined Keywords

Two elements of the ``acmart'' document class provide powerful
taxonomic tools for you to help readers find your work in an online
search.

The ACM Computing Classification System ---
<https://www.acm.org/publications/class-2012> --- is a set of
classifiers and concepts that describe the computing
discipline. Authors can select entries from this classification
system, via <https://dl.acm.org/ccs/ccs.cfm>, and generate the
commands to be included in the \LaTeX\ source.

User-defined keywords are a comma-separated list of words and phrases
of the authors' choosing, providing a more flexible way of describing
the research being presented.

CCS concepts and user-defined keywords are required for for all
articles over two pages in length, and are optional for one- and
two-page articles (or abstracts).

## Sectioning Commands

Your work should use standard \LaTeX\ sectioning commands:
\verb|\section|, \verb|\subsection|, \verb|\subsubsection|,
\verb|\paragraph|, and \verb|\subparagraph|. The sectioning levels up to
\verb|\subsubsection| should be numbered; do not remove the numbering
from the commands.

Simulating a sectioning command by setting the first word or words of
a paragraph in boldface or italicized text is {\bfseries not allowed.}

Below are examples of sectioning commands.

### Subsection

\label{sec:subsection}

This is a subsection.

#### Subsubsection

\label{sec:subsubsection}

This is a subsubsection.

**Paragraph:** 

This is a paragraph.

\subparagraph{Subparagraph}

This is a subparagraph.

## Tables

The ``\verb|acmart|'' document class includes the ``\verb|booktabs|''
package --- <https://ctan.org/pkg/booktabs> --- for preparing
high-quality tables.

Table captions are placed {\itshape above} the table.

Because tables cannot be split across pages, the best placement for
them is typically the top of the page nearest their initial cite.  To
ensure this proper ``floating'' placement of tables, use the
environment **table** to enclose the table's contents and the
table caption.  The contents of the table itself must go in the
**tabular** environment, to be aligned properly in rows and
columns, with the desired horizontal and vertical rules.  Again,
detailed instructions on **tabular** material are found in the
*\LaTeX\ User's Guide*.

Immediately following this sentence is the point at which
Table [tab:freq] is included in the input file; compare the
placement of the table here with the table in the printed output of
this document.

\begin{table}
  \caption{Frequency of Special Characters}
  \label{tab:freq}
  \begin{tabular}{ccl}
    \toprule
    Non-English or Math&Frequency&Comments\\
    \midrule
    \O & 1 in 1,000& For Swedish names\\
    $\pi$ & 1 in 5& Common in math\\
    $ & 4 in 5 & Used in business\\
    $\Psi^2_1$ & 1 in 40,000& Unexplained usage\\
  \bottomrule
\end{tabular}
\end{table}

To set a wider table, which takes up the whole width of the page's
live area, use the environment **table*** to enclose the table's
contents and the table caption.  As with a single-column table, this
wide table will ``float'' to a location deemed more
desirable. Immediately following this sentence is the point at which
Table [tab:commands] is included in the input file; again, it is
instructive to compare the placement of the table here with the table
in the printed output of this document.

\begin{table*}
  \caption{Some Typical Commands}
  \label{tab:commands}
  \begin{tabular}{ccl}
    \toprule
    Command &A Number & Comments\\
    \midrule
    `{\char'134`author} & 100& Author \\
    `{\char'134`table}& 300 & For tables\\
    `{\char'134`table*}& 400& For wider tables\\
    \bottomrule
  \end{tabular}
\end{table*}

Always use midrule to separate table header rows from data rows, and
use it only for this purpose. This enables assistive technologies to
recognise table headers and support their users in navigating tables
more easily.

## Math Equations

You may want to display math equations in three distinct styles:
inline, numbered or non-numbered display.  Each of the three are
discussed in the next sections.

### Inline (In-text) Equations

A formula that appears in the running text is called an inline or
in-text formula.  It is produced by the **math** environment,
which can be invoked with the usual
`{\char'134`begin\,\ldots{\char'134}end} construction or with
the short form `$\,\ldots$`. You can use any of the symbols
and structures, from $\alpha$ to $\omega$, available in
\LaTeX [Lamport:LaTeX]; this section will simply show a few
examples of in-text equations in context. Notice how this equation:
\begin{math}
  \lim_{n\rightarrow \infty}x=0
\end{math},
set here in in-line math style, looks slightly different when
set in display style.  (See next section).

### Display Equations

A numbered display equation---one set off by vertical space from the
text and centered horizontally---is produced by the **equation**
environment. An unnumbered display equation is produced by the
**displaymath** environment.

Again, in either environment, you can use any of the symbols and
structures available in \LaTeX\@; this section will just give a couple
of examples of display equations in context.  First, consider the
equation, shown as an inline equation above:
\begin{equation}
  \lim_{n\rightarrow \infty}x=0
\end{equation}
Notice how it is formatted somewhat differently in
the **displaymath**
environment.  Now, we'll enter an unnumbered equation:
\begin{displaymath}
  \sum_{i=0}^{\infty} x + 1
\end{displaymath}
and follow it with another numbered equation:
\begin{equation}
  \sum_{i=0}^{\infty}x_i=\int_{0}^{\pi+2} f
\end{equation}
just to demonstrate \LaTeX's able handling of numbering.

## Figures

The ``\verb|figure|'' environment should be used for figures. One or
more images can be placed within a figure. If your figure contains
third-party material, you must clearly identify it as such, as shown
in the example below.
\begin{figure}[h]
  \centering
 \includegraphics[width=\linewidth]{sample-franklin}
  \caption{1907 Franklin Model D roadster. Photograph by Harris &
    Ewing, Inc. [Public domain], via Wikimedia
    Commons. (<https://goo.gl/VLCRBB>).}
  \Description{A woman and a girl in white dresses sit in an open car.}
\end{figure}

Your figures should contain a caption which describes the figure to
the reader.

Figure captions are placed {\itshape below} the figure.

Every figure should also have a figure description unless it is purely
decorative. These descriptions convey what’s in the image to someone
who cannot see it. They are also used by search engine crawlers for
indexing images, and when images cannot be loaded.

A figure description must be unformatted plain text less than 2000
characters long (including spaces).  {\bfseries Figure descriptions
  should not repeat the figure caption – their purpose is to capture
  important information that is not already provided in the caption or
  the main text of the paper.} For figures that convey important and
complex new information, a short text description may not be
adequate. More complex alternative descriptions can be placed in an
appendix and referenced in a short figure description. For example,
provide a data table capturing the information in a bar chart, or a
structured list representing a graph.  For additional information
regarding how best to write figure descriptions and why doing this is
so important, please see
<https://www.acm.org/publications/taps/describing-figures/>.

### The ``Teaser Figure''

A ``teaser figure'' is an image, or set of images in one figure, that
are placed after all author and affiliation information, and before
the body of the article, spanning the page. If you wish to have such a
figure in your article, place the command immediately before the
\verb|| command:
\begin{verbatim}
  \begin{teaserfigure}
 \includegraphics[width=\textwidth]{sampleteaser}
    \caption{figure caption}
    \Description{figure description}
  \end{teaserfigure}
\end{verbatim}

## Citations and Bibliographies

The use of \BibTeX\ for the preparation and formatting of one's
references is strongly recommended. Authors' names should be complete
--- use full first names (``Donald E. Knuth'') not initials
(``D. E. Knuth'') --- and the salient identifying features of a
reference should be included: title, year, volume, number, pages,
article DOI, etc.

The bibliography is included in your source document with these two
commands, placed just before the \verb|